 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Optoway SPS-7110VWG FEATURES l l l l l l l l l l l l SPS-7110VWG 1 *********************************************************************************************************************************************************************** (RoHS Compliant) DESCRIPTION 1310 nm / 1.5 Gb/s Medium Power SM Video Digital Diagnostic SFP Transceiver ********************************************************************************************************************************************************************** SMPTE 292M/297M/259M Compatible Hot-Pluggable SFP Footprint LC Optical Transceiver Small Form-Factor Pluggable (SFP) MSA compatible Speed from 50 Mbps to 1.5 Gbps Distance up to 21 km for 1.5G-SDI Support Video Pathological Patterns for SD-SDI and HD-SDI SFF-8472 Digital Diagnostic Function Single +3.3 V Power Supply RoHS-6 Compliant 0 to 70oC Operation Hot Pluggable Class 1 Laser International Safety Standard IEC-60825 Compliant The SPS-7110VWG is a single mode transceiver module designed to transmit/receive optical serial digital signals as defined in SMPTE 292M/297M/259M. It supports from 50 Mbps to 1.5 Gbps and is specifically designed for transmitted the SMPTE 292M, SMPTE 297M and SMPTE 259M SDI pathological patterns. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. It is with 1310 nm laser transmitters. The transmitter can transmit signal from 50 Mbps to 1.5 Gbps with up to 30 km of single-mode fiber. A maximum distance of 21 km is achievable with 1.5 Gbps pathological signals. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l SMPTE 292M/297M/259M Compliant Electrical-to-Optical Interfaces l High-density Video Routers ORDER INFORMATION P/No. Type Bit Rate (Mb/s) 50 to 1500 TX (nm) 1310 Power (dBm) 0 to -7 SPS-7110VWG TRX RX Sen. (nm) (dBm) 1260/1620 0 to -20 Package Temp (oC) RoHS Compliant Yes LC SFP with DMI 0 to 70 LINK DISTANCE SDI HD-SDI SD-SDI Bit Rate 1.485Gbps 270Mbos Max. Link Distance (km) 21 30 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 V1.0 Optoway ABSOLUTE MAXIMUM RATINGS Absolute Maximum Ratings Parameter Storage Temperature Operating Case Temperature Power Supply Voltage ESD Tolerance on all pins Relative Humidity Symbol Tstg Tc Vcc --Min -40 0 0 5 Max 85 70 4 1 95 Units o C o C V KV HBM % RH SPS-7110VWG 2 *********************************************************************************************************************************************************************** Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Notes non-condensing Recommended Operating Conditions Parameter Symbol Power Supply Voltage Vcc Operating Case Temperature Tc Baud Rate Power Supply Current Icc Min 3.135 0 50 Typ 3.3 1485 200 Max 3.465 70 1500 280 Units / Notes V o C Mb/s mA Transmitter Specifications (0 oC < Tc < 70 oC, 3.13V < Vcc < 3.47V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Extinction Ratio Relative Intensity Noise Optical Rise Time / Fall Time Electrical Differential Input Voltage Disable Input Voltage -- Low Disable Input Voltage -- High SCL, SDA 1. 2. Symbol Po ER RIN tr / tf Min -7 1290 --5 Typ Max 0 1330 3 -120 270 800 1.5 200 0 2.0 2.5 0 1200 0.8 Vcc+0.3 Vcc+0.3 0.5 Units dBm nm nm dB dB/Hz ps ps ns mVp-p V V V V Notes 1 At 25oC RMS () 1310 7.5 2, SMPTE 292M 2, SMPTE 344M 2, SMPTE 259M AC coupled input TX Output Enabled TX Ouput Disabled V IH - VIL VTDIS,L VTDIS,H V OH V OL Output power is power coupled into a 9/125 m single mode fiber. 20% to 80%, unfiltered. Receiver Specifications (0oC < Tc < 70oC, 3.13V < Vcc < 3.47V) Parameter Optical Wavelength of Operation Sensitivity for SMPTE 292M 1.485 Gb/s Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Optical Return Loss Electrical CML Output (Differential) Optical Rise Time / Fall Time Symbol Min 1260 0 0 ---31 1 Typ ---------27 550 tr / tf 660 850 270 800 1.5 Max 1620 -18 -20 -21 --6 Units nm dBm dBm dBm dBm dB dB mVp-p ps ps ns Notes Sen Pa Pd Pathological PRBS 223-1, BER=1E-12 Transition: low to high Transition: high to low AC coupled output 3, SMPTE 292M 3, SMPTE 344M 3, SMPTE 259M *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 V1.0 Optoway Output LOS Voltage -- Low Output LOS Voltage -- High SCL, SDA 3. 20% to 80%, unfiltered. V OL V OH V OH V OL 0 2.5 2.5 0 0.5 Vcc+0.3 Vcc+0.3 0.5 V V V V SPS-7110VWG IOH=40A, 1 TTL unit load 3 *********************************************************************************************************************************************************************** IOL=-1.6mA, 1 TTL unit load MODULE DEFINITION Module Definition 4 PIN 5 SCL PIN 6 SDA Interpretation by Host Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SCL and SDA appear as no connector (NC). When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 V1.0 Optoway CONNECTION DIAGRAM SPS-7110VWG 4 *********************************************************************************************************************************************************************** PIN 1 2 3 4 5 6 7 8 9 10 Signal Name TX GND TX Fault TX Disable MOD-DFE2 MOD-DEF1 MOD-DEF0 N/C LOS RX GND RX GND Description Transmitter Ground Transmitter Fault Indication Transmitter Disable (Module disables on high or open) Modulation Definition 2 - Two wires serial ID Interface Modulation Definition 1 - Two wires serial ID Interface Modulation Definition 0 - Ground in Module Not Connected Loss of Signal Receiver Ground Receiver Ground PIN 11 12 13 14 15 16 17 18 19 20 Signal Name Description RX GND Receiver Ground RX DATA OUT- Inverse Receiver Data Out RX DATA OUT+ Receiver Data Out RX GND Vcc RX Vcc TX TX GND TX DATA IN+ TX DATA INTX GND Receiver Ground Receiver Power - 3.3V5% Transmitter Power - 3.3V5% Transmitter Ground Transmitter Data In Inverse Transmitter Data In Transmitter Ground MODULE DEFINITION Module Definition 4 MOD-DEF2 PIN 4 SDA MOD-DEF1 PIN 5 SCL MOD-DEF0 PIN 6 LV-TTL Low Interpretation by Host Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector (NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 family of components. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 V1.0 Optoway RECOMMENDED CIRCUIT SCHEMATIC VeeT Tx_DISABLE Tx_FA ULT (1,17,20) 3 2 4. 7K to 10K TD + 18 Z=50 TD 19 Z=50 1H 10F 100nF Vcc 3.3V 10F TD + TD Re-Clocker SPS-7110VWG 5 *********************************************************************************************************************************************************************** Tx_DISABLE Tx_FA ULT LD Driver 100 VccT 16 100nF VccR 15 100nF 10F 1H Protocol IC RD - 12 Z=50 RD + Re-Clocker POST Amp RD + 13 Z=50 4.7K to 10K RD - LOS VeeR MOD_DEF(0) 8 (9,10,11,14) 6 5 4 4.7K to 10K Vcc 3.3V 4. 7K to 10K LOSS OF SINGA L MODULE DETECT SCL SDA 4.7K to 10K EEPROM MOD_DEF(1) MOD_DEF(2) SFP module PACKAGE DIAGRAM Units in mm Note: Specifications subject to change without notice. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 V1.0 Optoway REVISION HISTORY Version 1.0 Initial datasheet SPS-7110VWG 6 *********************************************************************************************************************************************************************** Subject Release Date 2008/10/1 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 V1.0 |
Price & Availability of SPS-7110VWG
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |